Bucket Capacity, Earthwork

Cum

1.0

Bucket Capacity, Earthwork

Cum

0.3

Dump Height

mm

2740

Maximum Dig Depth

mm

4750

Load Over Height

mm

3335

Reach at Ground Level

mm

5910

Pin Height

mm

3610

Maximum Working Height

mm

5585

Reach at Ground

mm

1990

Maximum Load Over Height

mm

4070

Reach at full Height

mm

880

Reach at full Height

mm

2085

Digging Depth with Bucket flat on ground

mm

50

Bucket Rotation

Deg

187

Rollback at Ground

mm

45

Bucket Tearout

Kgf

4600

Dump Angle

mm

45

Dipper Tearout

Kgf

2825

Weight with std. GP Loader Bucket

Kg

7000

Lift Capacity from Pivot at full reach

Kg

1800

Payload

Kg

1950

Bucket Width

mm

2420

Overall Length

mm

6170

Model & Make

4R 1040

KOEL

Overall Height

mm

3875

Type (4 Cylinder, water cooled, diesel)

Height to top of Cabin

mm

2900

Power at 2200 rpm

Hp.

72

Wheel Base

mm

2125

Maximum Torque @ 1500 rpm

Kgm.

27.5

Minimum Ground Clearance

mm

355

Fuel Tank fill capacity

Litres

70

Slew Ground Clearance

mm

570

Coolant fill capacity

Litres

7

Width

mm

2375

Engine Lub. Oil fill Capacity

Litres

12.5

Track Front

mm

1800

Track Rear

mm

1740

The Transmission is of the Powershuttle type with 4 forward and reverse speeds. The transmission is provided with electrically actuated forward/reverse control. Steering Column mounted shuttle lever enable smooth shifting of gears from forward to reverse using finger tip operations.

The Drive line consists of the Engine, Torque ConvertorPowershuttle Gear Box, Axle and connecting Propellor Shaft.
Drive Line Stall Ratio
2.62:1

Oil fill Capacity

Litres

14

Speeds

Model & Make

4R 1040

KOEL

I Gear

Kmph

5.6

Type (4 Cylinder, water cooled, diesel)

II Gear

Kmph

10.9

Power at 2200 rpm

Hp

72

III Gear

Kmph

21.9

Maximum Torque @ 1500 rpm

Kgm

27.5

IV Gear

Kmph

32.4

Fuel Tank fill capacity

Litres

70

Coolant fill capacity

Litres

7

Main Pump flow @ 2200 rpm

Lpm

104

Engine Lub. Oil fill Capacity

Litres

12.5

Auxiliary Pump @ 2200 rpm

Lpm

44

Working Pressure, Loader attachment

Bar

180

The heavy duty rigid rear axle is of outbard planetary type with built-in multi disc brakes for compact mounting & extended service life.

Working Pressure, BackHoe attachment

Bar

210

Hydraulic system fill capacity

Litres

110

Filtration Nominal

Microns

10

The Steerable Front axle is provided generous bearing for rough terrain. The Kind Pin inclination gives directional Stability, Maximum axle oscillation angle is 9⁰per side.

The Spacious ROPS cabin is surrounded on all sides by weather proof toughened glass for excellent visibility. The Cushioned seat with shock absorbing springs can be swung through 180⁰with an automatic lock for Backhoe operation. Hydraulic Joysticks are provided for Backhoe operation. Wind shield wipers on both front and rear assist good visibility in poor weather and working conditions.

The two-piece Control Panels are logically placed for greater effectiveness in driving and working positions.

Engine oil pressure, water temperature, rpm and hour meter, Ammeter and fuel level gauges are provided on the side control panel.

All driving control switches and lamps are ergonomically placed on the steering column. The loader control levers are on the right side of the operator for ease of control.

The Multi disc oil immersed Service Brakes provide effective braking and long disc life.

The Service Brake are actuated by two non-boosted. Foot operated master cylinder with single-wheel braking option.

The hand operated Parking brake actuated the main multi disc brakes inside the axle.

The Hydrostatic Steering system consists of field proven steering unit & safety valves and dedicated pump. The steering circuit is equipped for Emergency Steering.

Front 9.00x16.00x16 Ply Rating

Rear 16.90x26.80x12 Ply Rating

Halogen working lights are provided on both front and rear. Driving head lights, direction indicators, parking lamps and brake lamps are provided and per standards and road transport regulations.