KLR
Industries Limited was incorporated in 1984. KLR
Industries manufactures a wide range of mining and
drilling equipment, construction equipment, drilling
rigs, waterwell drill rigs, direct rotary rigs, DHT
hammer and bits.
KLR
drilling equipment is designed using
state-of-the-art technologies and is manufactured to
suit international standards of quality and
precision. The company has been accredited with ISO
9001:2000 certification.
TRUCK /
SKID / TROLLEY MOUNTED BOREWELL DRILL RIGS
KLR
offers truck-mounted borewell drilling rigs capable
of drilling through direct rotary or rotary / DTH
modes. These drilling rigs have bores of diameter
16in, 12in, 8in or 6in and can drill up to 1,000m.
KLR also provides a core-hole drilling feature with
drill hole diameter of 115mm. The different drilling
equipment models offered are:
KLR
300 DTH / rotary drill rig - it has a drill hole
size of 10in and drills up to 984ft. The KLR 300 has
a rotary head, which has a maximum speed of
0rpm-100rpm.
KLR DR
100 rotary drill rig - the KLR 100 has a drill
hole size of 10in and can drill up to 330ft.
KLR
400 meters DTH / rotary drill rig - the KLR 400
has a drill hole size of 6.5in and drills up to
1,312ft.
KLR-CDR
400 core blast hole drill rig - the KLR CRD 400
drills up to a depth of 2,200ft.
QKH 46
blast hole drill rig - the QKH 46 blast hole
drill rig has a drill hole size of 6in and drills up
to 300ft.
KLR
DTH drill rigs - the KLR DTH drill rigs have a
drilling diameter of 6in-10in.
TRACTOR
MOUNTED BLAST HOLE / BOREWELL / COREHOLE DRILLING
MACHINES
KLR
provides hydraulically operated tractor mounted rigs
specially designed for fast and cost effective
drilling by air, mud or foam drilling methods. The
tractor mounted drilling rigs use hole hammers and
bits, core barrel and tools, rotary tricone bits and
other conventional tools. The drilling rigs have
bores of diameter 4.5in, 6in and 6.5in and can drill
up to 500ft.
CRAWLER
MOUNTED BLAST HOLE DRILLING RIGS
The
crawler mounted blast hole drilling rigs are
suitable for mines, quarries and construction sites.
It is hydraulically operated and has a diesel engine
on board. The crawler mounted blast hole has an air
compressor and is used for 6in depths.
KLR
industries also undertake custom built drilling
equipment and machines. It designs, manufactures and
supplies these custom built special machinery on the
basis of modular, multipurpose design approach.
BACKHOE
LOADERS
The two
backhoe loader models offered by KLR are:
KLR-BL-400 - KLR-BL-400 has a backhoe loader
bucket capacity of 1m³ and an excavator bucket
capacity of 0.3m³. The transmission is of
power-shuttle type with four forward and reverse
speeds.
KLR-VERSATILE-400 - KLR-VERSATILE-400 is a
hydrodynamic torque converter with a separate clutch
plate drive for forward and reverse gears. It has a
bucket capacity of 1m³.
BUTTON
BITS AND HAMMERS
KLR
button bits and hammers are manufactured from the
best quality alloy steel. The button bits and
hammers are heat-treated and are fully process
controlled.
U-DEX KL
DRILLING AND CASING
The U-DEX
KL drilling and casing is the most advanced and
high-tech model available for high proficiency
drilling operations. Its double-pinned pilot bit
eliminates the risk of loosening bits down the hoe.
It has a button angle and enhanced diameter for the
reamer. This facility is available for uniform wear
and load distribution over the buttons. Internal
driver reamer is available for optimum reaming. The
U-DEX KL system is available in 115mm / 152mm-165mm
and 152mm-165mm / 215 mm configurations to suit all
conventional hammers.
KLR CORE
/ ROTARY DRILL RIG
KLR core
rotary drill rigs have a drilling depth of 150m and
a maximum drilling torque of 250kg/m. It has a drill
engine with 149.6hp at 2,400rpm.
